Setting The Limit Positions - Becker Centronic VarioControl VC260 Montage- Und Betriebsanleitung

Connection and assembly of the battery and upper
housing
Secure the battery in the housing using the adhesive pads provi‐
ded. The 12 V plug is optionally available.
Note
Ensure that the point of adhesion is dry, clean and
free from grease.
It is not necessary to manually set the limit positions, as the control
unit automatically detects these by means of current detection.
Note
Ensure that fixed stops are in place and anti-lifting
devices are fitted in the upper limit position.
28

Setting the limit positions