Ps Mailbox Protection & Bin Number Setting - Brother HL-2070N Installationsanleitung

3.1.6. PS mailbox protection & bin number setting
Command
<HL-2060>
# setoutputprotect
<HL-2460/3260/7050>
<</BROutbinProtect #>> setpagedevice
Parameter
#
<HL-2060/2460/7050>
 Lower unit:
 Lower unit + Upper unit: #1 to 10 from bottom to top
<HL-3260>
#1 to 4 from bottom to top
Default = 0
Explanation
 This operator sets the bins with numbers larger than the TrayNumber specified as mailbox use only. They
cannot then be used for either stacker or sorter functions.
 If the bin number is set to 0, the mailbox protection is released, then all bins can be used for stacker and
sorter functions.
 If the bin number is set out of the effective range, this operator is ignored.
<HL-2060/2460/7050>
Setting type
MX not installed

Lower unit installed

Lower & upper unit installed

<HL-3260>
Setting type
MX not installed

MX installed

<Example>
(HL-2060)
This operator is registered in 'statusdict'.
statusdict begin
5 setoutputprotect
end
(HL-2460/3260/7050)
<</BROutbinProtect 4>> setpagedevice
APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 9
#1 to 5 from bottom to top
Effective range
0
0, 1  5
0, 1  10
Effective range
0
0, 1  4