Pcl Output Tray Setting; Ps Output Tray & Mode Setting - Brother HL-2070N Installationsanleitung

3.1.4. PCL output tray setting

Command
Esc&l#G (27)(38)(108)#(71)
Parameter
# denotes the output tray.
 1: Select the printer face-down output tray.
 3: Select #1 bin of the Mailbox unit.
4: Select #2 bin of the Mailbox unit.

5: Select #3 bin of the Mailbox unit.

6: Select #4 bin of the Mailbox unit.

7: Select #5 bin of the Mailbox unit.

8: Select #6 bin of the Mailbox unit.

9: Select #7 bin of the Mailbox unit.

10: Select #8 bin of the Mailbox unit.

11: Select #9 bin of the Mailbox unit.

12: Select #10 bin of the Mailbox unit.

Default = 1
<HL-L6300/L6400>
HL-L6300/L6400 series do not support this command.
Explanation
 This command selects the specified output tray, trays defined as Mailboxes are numbered from the bottom of
the unit upwards
 This command is ignored when the specified tray is not available.
 The PJL OUTBIN command is ignored when this command is executed.
 Refer to the Technical Reference Guide Section 4.1.2 'Output tray' in Chapter 2 'PCL'.
3.1.5. PS output tray & mode setting
Command
<HL-2060>
# setoutputmode
<HL-2460/3260/7050>
<HL-L6300/L6400>
<</BROutbinMode #>> setpagedevice
Parameter
<HL-2060>
<HL-2460/3260/7050>
#
0: Select the printer face-down output tray.

1: Select the stacker function.

2: Select the sorter function.

4~10: Select the printer face-down output tray.

11: Select #1 bin of the Mailbox unit.

12: Select #2 bin of the Mailbox unit.

13: Select #3 bin of the Mailbox unit.

14: Select #4 bin of the Mailbox unit.

 15 Select #5 bin of the Mailbox unit.
16: Select #6 bin of the Mailbox unit.

17: Select #7 bin of the Mailbox unit.

18: Select #8 bin of the Mailbox unit.

19: Select #9 bin of the Mailbox unit.

20: Select #10 bin of the Mailbox unit.

APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 7
<1Bh><38h><6ch>#<47h>