Herunterladen Inhalt Inhalt Diese Seite drucken

Graphics - Brother HL-2070N Installationsanleitung

Laserdrucker
Vorschau ausblenden Andere Handbücher für HL-2070N:
Inhaltsverzeichnis

Werbung

 If bits 1 and 2 of n
grid.
 If bits 1 and 2 of n
 Bits 5 to 7 of n
specify the number of columns left blank to the left of the defined character in
5
proportional spacing mode. Up to seven columns can be skipped.
 Bits 1 to 4 of n
specify the width in columns of the defined character in proportional spacing mode.
5
Up to fifteen columns can be used to define the character.
 Downloaded characters are selected using the Esc I command and then printed by sending the
appropriate character codes.
5.4.

Graphics

Set single-density image mode
EscKn
n
<image data> (27)(75)n1n2<image data>
1
2
data>
 This command enables you to define and print a single line raster bit image on a single text line.
 n
and n
define the number of bytes that comprise the image.
1
2
 The image consists of 256*n
4/30".
 Images are printed left to right.
 Images are printed at a horizontal resolution of 60 dots per inch and at an approximate vertical
resolution of 72 dots per inch.
 Each byte represents a vertical column of eight dots, the most significant bit representing the dot at
the top. Simply set a bit to 1 if you want a dot to appear in that position, and to 0 if you want white
space to appear.
10 WIDTH "LPT1:", 255
20 LPRINT "*** ESC K n1 n2 ***";CHR$(10);
30 FOR i=1 TO 5
40 '* STANDARD DENSITY BIT IMAGE MODE *
50 LPRINT CHR$(27);"K";CHR$(160);CHR$(0);
60 FOR J=1 TO 8
70 FOR K=1 TO 20
80 N=2^J-1
90 LPRINT CHR$(N);
100 NEXT K
110 NEXT J
120 LPRINT CHR$(10);
130 NEXT I:END
< Sample 15 >
Set double-density image mode
EscLn
n
<image data> (27)(76)n1n2<image data>
1
2
data>
 This command enables you to define and print a single line raster bit image on a single text line.
 n
and n
define the number of bytes that comprise the image.
1
2
 The image consists of 256*n
4/30".
 Images are printed left to right.
are 01 the least significant bit of each data byte is replicated in rows 9 to 12 of the
4
are 10 the bits 1 to 4 of each data byte are replicated in rows 9 to 12 of the grid.
4
+n
bytes of data, each byte representing a single vertical column of
2
1
+n
bytes of data, each byte representing a single vertical column of
1
2
CHAPTER 7 IBM PROPRINTER - 18
<1Bh><4Bh>n1n2<image
<1Bh><4Ch>n1n2<image

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hl-2040Hl-2030

Inhaltsverzeichnis