Installation - Conceptronic CSATAC2 Schnellstartanleitung

ENGLISH
1.1 Features and Benefits
•
Compliant with Serial ATA Specification, revision 1.0
•
Plug into the 40-pin connector of hard disk drive directly, no PCI-slot is
required
•
Compatible with various brands of Serial ATA host adapters
•
Supports data transfer rates up to 133MB/s
•
Works with any serial ATA-enabled systems
•
Allows existing Ultra ATA 133/100/66 hard disk drives to work with the latest
Serial ATA interface
1.2 System Requirements
Ÿ
Serial ATA-enabled Pentium or equivalent PC with an available Serial ATA
port
Ÿ
Windows 98/98SE/ME/NT4.0/2000/XP

2. Installation

2.1 Hardware Installation
General instructions for installing the adapter are provided below, refer to your
computer's manual for further information, if needed.
1. Connect the serial ATA cable to the adapter (Please refer to figure 1)
Figure 1
5