Troubleshooting - Scheppach HS81S Originalbetriebsanleitung

Troubleshooting

Problem Possible Cause
Saw blade gets loose af- • Fastening nut tightened insufficiently
ter turning off the motor
Motor does not start • Failure of mains fuse
• Extension cable defect
• Connections on the motor or switch defect
• Motor or switch defective
Motor wrong direction of • Capacitor defective
rotation • incorrect connection
No motor output turns • Cross-section of the extension line is insuf-
off automatically
• Overload by dull saw blade,
Burns on the cutting • Blunt saw blade
surface • wrong saw blade
28 GB
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
ficient
Help
• Tighten fastening nut, left-handed thread
• Check the mains fuse.
• See "Electrical Connection" in the operat-
ing manual
• Have it checked by an electrician
• Have it checked by an electrician
• Have it checked by an electrician
• Have electrician exchange the polarity of
the wall socket
• see Electrical connection
• Change saw blade
• Sharpen saw blade, replace
• Replace saw blade