Herunterladen Inhalt Inhalt Diese Seite drucken

Disposal And Recycling; Troubleshooting; Possible Cause - Scheppach HS110 Original Bedienungsanleitung

Tischkreissäge
Vorschau ausblenden Andere Handbücher für HS110:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

16. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit.
The raw materials in this packaging can be reused
or recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Do not throw batteries away with house-
hold waste, or throw them into fire or water. Batteries
should be collected and recycled or disposed of in
an environmentally friendly manner. Defective com-
ponents must be disposed of as special waste. Ask
your dealer or your local council!
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of waste
equipment may have negative consequences for the
environment and human health due to potentially
hazardous substances that are often contained in
electrical and electronic equipment.

17. Troubleshooting

Fault

Possible cause

Blade dissolves after
To slightly tightened fastening nut
switching off the
engine
Engine will not start
Failure mains fuse
Defective extension cable
Connections on motor or switch not in
order
Motor or switch faulty
Motor wrong direc-
Capacitor faulty
tion of rotation
Wrong connection
Motor will not work,
Cross section of the extension cable
the fuse is active
does not sufficiently
Overload by a blunt saw blade
Fire marks on the
blunt saw blade
cutting surface
wrong saw blade
38 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
By properly disposing of this product, you are also
contributing to the effective use of natural resources.
You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
Batteries and rechargeable batteries do not be-
long in the household waste!
As the consumer you are required by law to
bring all batteries and rechargeable batteries,
regardless whether they contain harmful sub-
stances* or not, to a collection point run by the local
authority or to a retailer, so that they can be disposed
of in an environmentally friendly manner.
*labelled with: Cd = cadmium, Hg = mercury, Pb =
lead
• Remove the batteries from the laser before dispos-
ing of the machine and the batteries.
Possible cause
Tighten the right hand thread nut
Check mains fuse
Replace extension cord
Repair by electrical specialist
Repair by electrical specialist
Repair by electrical specialist
Exchange polarity of outlet by an qualified electrician
see „Electrical connection"
Change saw blade
Sharpen or change saw blade
Change saw blade

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

5901312901

Inhaltsverzeichnis