How To Modify A Mask; Advanced Setting Menu - Videotec ULISSE Bedienungsanleitung

10.1.8.5 How to modify a mask

Choose an enabled mask by selecting Mask Number
from the Edit Masks menu (Fig. 92, page 45). Select
Edit Mask to edit it.
• Operate the joystick (Pan & Tilt) to enlarge or
reduce the rectangle until the desired effect is
obtained.
MASK 1
Edit Mask: ON
Iris Close→ PTZ enabled
Fig. 97
• Confirm by turning the zoom to tele.
MNVCUPTDMB_1511_EN

10.1.8.6 Advanced Setting Menu

This menu is used to configure the SONY module.
1. Zoom: Allows access to the Zoom submenu.
2. Focus: Allows access to the Focus submenu.
3. Exposure: Allows access to the Exposure.
Infrared: Allows access to the Infrared submenu.
4.
White Balance: Allows access to the White
5.
Balance submenu.
6. Other: Allows access to the Other submenu.
ADVANCED
------------------------
1>ZOOM
2 FOCUS
3 EXPOSURE
4 INFRARED
5 WHITE BALANCE
6 OTHER
Fig. 98
>
>
>
>
>
>
47