Power Consumption And Fuse Size; Installation - SystemAir SAVE VSR 500 Betriebs- Und Wartungsanleitung

10

| Installation

2. 20% (LOW LEVEL)
3. 50% (NORMAL LEVEL)
4. 80% (HIGH LEVEL)
5. 100% (MAXIMUM LEVEL)
Airflow level settings can be changed in Service menu.
The pressure is affected by the filter type and differ with each filter combination.
System curves for each airflow level with standard filters shown bellow.
5.4.4.1 Supply air, G3/ISO Coarse 60% type filter
5.4.4.2 Extract air, G3/ISO Coarse 60% type filter
5.4.5

Power consumption and fuse size

SAVE VSR 300/500 come with 1670 Winstalled re-heater battery.
Model
Re-heater
Fans
Total power consumption
Fuse
6 Installation
This section describes how to install the unit correctly. To ensure a proper and fail-free operation, it is important that
the unit is installed according to these instructions.
VSR300
1670 W
166 W
1836 W
10 A
GB
VSR500
338 W
2008 W
13 A
211458 | A004