Display Of The Firmware Version; Cleaning The Unit; Specifications - IMG STAGE LINE RGBL-212DMX Bedienungsanleitung

9 Display of the Firmware Version

GB
To indicate the version number of the firmware
(operating system of the unit):
1) Press the button MENU / ESC repeatedly until
the main menu is reached.
2) Select the option
button UP or DOWN.
3) Press the button ENTER: The present version
number (e. g.

10 Cleaning the Unit

The plastic pane in front of the LEDs should be
cleaned at regular intervals, depending on impuri-
ties caused by dust, smoke or other dirt particles.
Only this will ensure that the light is radiated at
maximum brightness. Prior to cleaning, discon-
nect the mains plug from the socket. Only use a
soft, clean cloth and a mild detergent. Then wipe
the plastic pane dry.
For cleaning the other parts of the housing, only
use a dry, soft cloth. Never use chemicals or any
fluid; it may leak into the unit and cause damage.

11 Specifications

Power supply: . . . . . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . . . . . 110 VA
Light source: . . . . . . . . . . . . . 16 super bright
Ambient temperature: . . . . . . 0 – 40 °C
Dimensions W × H × D
(w /o mounting material): . . . . 99 × 10.5 × 17 cm
Weight: . . . . . . . . . . . . . . . . . 4.1 kg
Subject to technical modification.
All rights reserved by MONACOR
may be reproduced in any form or by any means for any commercial use.
18
in the main menu with the
) is displayed.
RGB LEDs,
3 W each
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual
®