Using The Evostar 1 In Tandem Mode; Fitting The Tandem Adaptors; Removing The Tandem Adaptors - KIDDY evostar1 Bedienungsanleitung

EN
KIDDY MaxiCosi
Evoluna i-Size Pepple plus
Evolunafix Cabrio fix
Evolution Pro 2
WARNING
Do not use any car seat unless specifically re-
commended by KIDDY.
For car seats used in conjunction with a chassis, this vehicle does not replace a
cot or a bed. Should your child need to sleep, then it should be placed in a suita-
ble pram body, cot or bed.

6. Using the Evostar 1 in tandem mode

6.1. Fitting the tandem adaptors.

Insert the tandem adaptors (fig. 33) onto the left and right sides of the main
chassis housings until it locks into place with a click (fig. 34). Ensure the locating
hook is aligned with the locating pin on the rear lower leg.
WARNING
Ensure the adaptors are engaged before use by
pulling them upwards.

6.2. Removing the tandem adaptors.

Depress the grey buttons (fig. 35; no. 1), un-hook the lower section from the rear
leg and remove from the chassis (fig. 35; no. 2).
23 23
Cybex Be safe
Aton Q Izi go
Cloud Q
Recaro
Privia