Kostal PIKO MP plus Anschlussanleitung Seite 39

Short Manual
Carlo Gavazzi EM24-DIN.AV9.3.X.IS.X
This three-phase energy meter is designated as „Carlo Gavazzi EM24" in the „Meter type" field in
the energy management settings of the inverter.
Meter type
B+G SDM220
Carlo Gavazzi EM24
Schneider iEM3155
RS485 interface settings at the energy meter:
Menu item
Addresse
Baud rate
Parity
Stop bits (quantity)
Device connection
PIKO MP (RJ10)
Contact / Pin
INFO
The energy meter is supplied configured with default Baud rate of 9600 Baud. Up to firmware
version HMI APP 2.9.0, a different default Baud rate was stored in the inverter. You must
change the Baud rate of the energy meter to 4800 Baud when using this firmware.
© 2018 KOSTAL Solar Electric GmbH
Settings
1
9600 Baud
None
1
Inverter Inverter
PIKO MP plus (RJ45)
1
2
3
Bus signal
6 Data A = B+
7 Data B = A-
8 Ground = GND
DE
EN
Energy meter
42
41
43
39