Operating instructions
! Unscrew the 4 screws at the seat
contact switch plate
! Remove the plate
! Turn the seat forward
! Unscrew the 4 screws of the seat
mounting
! Shift seat and refasten with
screws
! Remount seat contact switch
plate
Start machine
! Open unit cover, engage stay bar
Open the fuel tap
! Slide lever towards "O"
! Close unit cover
! Sit on the driver seat
! Do NOT actuate the drive pedal!
Note:
The machine is equipped with a
seat contact switch. The machine is
switched off as the driver leaves the
seat and the parking brake
automatically actuated.
KM 100/100 R D
! Main brush switch in its upper
position
! Side brush switch in its upper
position
! Turn ignition key beyond
position 1
! When the machine starts, release
ignition key
Note:
Never actuate the starter motor for
more than 10 s.
Wait at least 10 s before actuating
the starter motor again.
Run machine
Prior to start of the machine
! Main brush switch in its upper
position
! Side brush switch in its upper
position
English
Freewheel lever of axle drive must
be in its bottom position
! Start machine
Drive forwards
! Slowly press the driving pedal
26