Interacoustics Affinity 2.0 Gebrauchsanweisung Seite 6

2.0
Affinity Instruction for Use - English
Date: 2008-10-03 Page 3/15
Various optional tools:
Repeat any obtained curve by checking "Run" for the corresponding button
– then press Start.
The "Combined or Individual" button toggles between single and multiple
curve display
Select individual test buttons to view corresponding curves
Right click on any curve tab to Delete, Hide or apply a Cursor to that individual curve. Control
Cursor by mouse or arrow keys. Right click to disable cursor again.
  .
Smoothing of any selected curve can be done by mouse wheel or arrow keys
Prior to starting a test protocol, its content may be modified by checking or
unchecking "Run"
Individual test parameters may be edited prior to testing by right clicking on the
corresponding button. (Custom based tests only).
You may enter Comments to individual curves in the Comments Field
Compare sessions: Browse the session list within the HIT440 module to find any historical session.
Press "Add Session"
Print obtained recordings by selecting the Print button.
Save obtained session with the Save button