UK |
Operating instructions
UK
Heat recovery units
Congratulations on having pur chased a
domestic ventilation unit!
These operating instructions contain impor-
tant information about the ventilation unit, for
example about operating and setting options,
changing the air filter, fault messages and
fault rectification.
Read the operating instructions, especially the
safety instructions, through carefully. Follow
the instructions.
The ventilation unit has already been set up
by your specialist installer and set to the re-
quirements stated in the planning documents.
You can undertake individual settings in the
ventilation, temperature, humidity and sensor
menus. Unit settings and time programming
can be undertaken quickly and easily.
The ventilation unit can be operated and set
in various ways:
● Via the Internet using the
web tool.
● With control units installed in your living
spaces -
the simple control unit (included in the
scope of supply), the optional comfort con-
trol unit or
optional EnOcean wireless components.
● Via a ModBus or KNX bus system.
● Via PC/notebook with Ethernet connection.
If the
web tool is used, the registered
owner can also release authorisation for ten-
ants or installers, giving them special online
setting options on the ventilation unit.
34
Table of contents
10 Humidity ................................................. 54
11 Sensors.................................................. 55
14 Messages .............................................. 57
app or
18 Faults ..................................................... 63
Acknowledgements: © Maico Elektroapparate-Fabrik
GmbH. Translation of the original German instructions.
We cannot be held responsible for mistakes or printing
errors and retain the right to make technical modifi-
cations without giving prior notice. The brands, brand
names and protected trade marks that are referred to
in this document refer to their owners or their products.