E) Setting The Recording Quality - Conrad 75 28 09 Bedienungsanleitung

e) Setting the recording quality

The status LEDs (8) indicate the used setting. You can set the recording quality of your product
to suit your requirements.
Proceed as follows:
Press the 'POW/REC' key (13) for 2 seconds to
switch on the product.
The status LED (10) lights up red. This indicates
that your product is switched on and is in 'stand-
by' mode.
Press the 'MODE' (12) key to set the recording
quality.
The status LEDs (8) indicate which setting is
being used.
The table below can be used to set an appropriate combination:
Quality
Very good
Good
Medium
Low
You can change the fi le size depending on your resolution setting. The higher
your resolution, the greater the fi le size.
34
A-LED B-LED
ON ON
ON OFF
OFF ON
OFF OFF
8
12
Resolution (pixel/fps)
1280 x 1024 / 8 fps
1280 x 1024 / 5 fps
640 x 480 / 30 fps
640 x 480 / 5 fps
10
13