Menu Navigation; Mode Switching - Bresser 3310003 Bedienungsanleitung

OFF: To turn the camera off
TEST: Adjust settings, confirm, preview, playback
ON: To enter monitoring mode. The camera takes photos and
videos according to your settings.
First, set the slide button to "TEST". The camera is now
on, all functions and parameters can now be set. After
you have made the settings, you can set the slide button
to "ON". The camera screen turns black and the operation
indicator blinks. After 5 to 10 seconds the camera starts
operating in power save mode.

Menu Navigation

1. Press the "MODE" button to switch between photo and
video mode.
2. Press the "MENU" button to display the settings for the
currently active mode.
2. Press the and
the menus.
3. Press the "OK" button to make a selection.
4. Press the "PLAYBACK" button to play back recorded
photos or videos. Press the "PLAYBACK" button again
to exit the playback mode.
*not included
22
buttons to navigate through

Mode switching

Press the "MODE" button to switch between photo and
video mode. With the "Menu" button you can also change
the mode, here you can also select "Photo+Video" and
"Timelapse".
1. Press the "Menu" button. Mode is already selected.
2. Press the "OK" button.
3. Press the keys to select a mode and press "OK" to
switch to the mode.
4. Move the "ON/TEST/OFF" switch to "ON" to start regular
operation of the camera.
5. Photo+Video mode records a photo first and then a
video.
6. The Timelapse mode takes photos at certain intervals
and creates a video from them.