Troubleshooting/Maintenance/Repair; Safety Information; Switching The Device Off For Maintenance Work; Preconditions - SystemAir AxZent Betriebsanleitung

11

Troubleshooting/maintenance/repair

11.1

Safety information

Danger from electrical voltage!
»
Troubleshooting and maintenance may only be carried out by a trained electrician, or trained and instructed specialist personnel!
»
Observe the work protection regulations when troubleshooting!
»
Observe the 5 rules of electrical safety (see section 2.5)!
»
Switch the fan off.
11.2

Switching the device off for maintenance work

WARNING
Danger from electrical voltage!
»
Observe the 5 rules of electrical safety (see section 2.5)!
Switch off the device via the control input.

Do not switch the motor (e.g. in cycle operation) on or off via the mains.

Disconnect the device from the power supply.

When disconnecting, make sure to remove the earth wire last!

11.3

Preconditions

•
The power supply has been switched off (all-pole circuit breaker).
•
The rotor is at a standstill.
Troubleshooting/maintenance/repair
49