Boiler During Operation; Boiler Shutdown - Gorenje Ecologic 23 Bedienungs, Wartungs Und Montageanleitungen

Use buttons + and - to select parameters in submenus. Short press MENU button
and set value of parameter starts flashing, which can then be modified with buttons +
T
and -.
Short press ON/OFF button and hold MENU button to scroll all menu choices and
return to basic display.
Button +
Press during operation to increase desired temperature water in the boiler for a
degree
Button –
Press during operation to
decrease desired water temperature in the boiler for a degree.

11.1 BOILER DURING OPERATION

The display shows current operation phase (e.g. TestFire, HeatUp etc.). Upper display shows set and
actual boiler power alternately every 5 seconds.
Press button + to increase set power value, and press button – to decrease it.
Press MENU button to display set water temperature in the boiler. You can modify it with buttons +
and -.
The boiler operates at set power, until water temperature in the boiler reaches modulation threshold or
until smoke gases reach limits. In first case, Regu H20 is displayed, and in second Regu Gas.
In case of power outage for less than 2 minutes, the boiler resumes normal operation when power
supply restores. If the outage lasts more than 2 minutes, the boiler automatically performs safety
shutdown and cooling and then restarts.

11.2 BOILER SHUTDOWN

When pressing and holding the ON/OFF button for more than half a second (during boiler operation),
the display shows ON, and the boiler starts shutdown sequence once the button is released. Dosing
screw turns off and the display indicates
increase of water temperature in the boiler. When the boiler cools down under set temperature, fans
switch to maximum speed and blow out the last parts from the firebox. Display indicates
STOP FIRE. Fans operate at high speed to prevent excessive
23
EN
OFF.