Configuration Areas - Trotec T250 Bedienungsanleitung

6.2 Configuration areas

CFG: In the CFG mode the values for the up-
per threshold (Hi) and the lower threshold (Lo)
are entered.
°C
This menu item can only be selected if the
DP mode is active. The value range for Hi
and Lo is from 0.0 to 9.9. The units (°C or °F)
°C
are taken from the temperature setting
TH IR DP CFG
currently selected for the DP mode.
The minimum difference between Hi and Lo must be 1.0.
B - 13
The values for Hi (upper display) and Lo (lower display) are entered
and confirmed one after another.
Unit 1: You select the unit of temperature with Unit 1. °C and °F are
available for selection.
Selection can be made with
Unit 2: This menu item can only be selected if the TH mode is active.
With Unit 2 you select the unit of absolute humidity (g/m
humidity (% r.H.) or the dewpoint temperature (dp°C, dp°F). % r.H.
is set at the factory.
Selection can be made with
Operating manual – English
and , confirmation with
3 ), relative
and , confirmation with
.
.