Connecting The Power Supply; Handling And Operation; Switch The Device On/Off; Select Operating Mode - Silvercrest SRBN 5 A1 Bedienungsanleitung Und Sicherheitshinweise

Connecting the power supply

■ Before connecting the device, compare the connection data (voltage and frequency)
on the rating plate with that of your mains power supply. This data must agree so
that the device is not damaged.
■ Insert the plug into a mains power socket.

Handling and operation

This section provides you with important information on handling and using the
device.
Switch the device on/off
♦ Move the main switch
♦ Turn the On/Standby switch/Volume control
to turn the device on.
♦ Turn the On/Standby switch/Volume control
ance into the position
♦ To switch the device off completely, move the main switch
tion.

Select operating mode

♦ Set the operating mode selector switch
▯ FM: Radio mode (FM)
▯
▯ AUX: Play back music from a device connected to the 3.5 mm jack

Radio mode

NOTE
► The technical features of this device enable an adjustable reception capa-
bility that exceeds the permitted FM frequency range of 87.5–108 MHz.
In some countries, different national regulations may apply to the assigned
radio frequency ranges. Please note that information received outside of
the assigned radio frequency ranges may not be exploited, passed on to
third parties or otherwise misused.
♦ Pull out the telescopic aerial
♦ Move the operating mode selector switch
♦ Switch on the device and set the desired volume.
The frequency scale
SRBN 5 A1
to the ON position.
to switch the device off.
: mode
Bluetooth ®
(AUX IN)
lights up orange.
clockwise past a slight resistance
anticlockwise past a slight resist-
to the desired operating mode.
and align it.
into the FM position.
into the OFF posi-
GB │ IE │ 7 ■