Lnb Settings - Megasat HD 4 Combo Bedienungsanleitung

4. DVB-S / S2 (Satellite search)

4.2 LNB settings

1
2
3
4
5
6
1. Astra 19E
2. 9750-10600
3. Auto
4. Auto
5. DiSEqC1.0 Port1
6. Fest
Shows the current satellite. Use the t u buttons to switch
satellites. With OK you get to the satellite list. Select the
desired one with the pq buttons and confirm with OK.
Shows the current LNB type. Use the t u keys to change
the LNB type. With OK you get into the LNB list. Select the
desired type with the pqbuttons and confirm with OK.
Shows the current 22 K status. Use the t u buttons to
toggle between ON and OFF.
Shows the current status of the LNB. Use the t u buttons to
toggle between AUTO, 18V and 13V.
(18 V = horizontal / 13 V = vertical)
Use the t u buttons to switch to the desired DiSEqC port or
between Unicable 1 and 2. If Unicable is selected, confirm
with OK and then select the port assignment and frequency.
Use the t u buttons to set the motor type. Choose
between fixed antenna, USALS and DiSEqC 1.2.
ENGLISH
09