Notes For Servicing And Operating Personnel; Warning Notes - Gemü 550 Montageanleitung

2.1 Notes for servicing and
operating personnel
The installation, operating and maintenance
instructions contain
notes that must be observed during commis-
sioning, operation, and maintenance. Non-
observance can cause:
Personal hazard due to electrical,

mechanical and chemical eff ects.
Hazard to nearby equipment.

Failure of important functions.

Hazard to the environment due to

the leakage of dangerous materials.
Prior to commissioning
Read the installation, operating and
G
maintenance instructions.
Provide adequate training for the
G
assembly and operating personnel.
Ensure that the contents of the
G
installation, operating and maintenance
instructions have been fully understood
by the responsible personnel.
Defi ne the areas of responsibility.
G
During operation
Keep the installation, operating and
G
maintenance instructions available at the
place of use.
Observe the safety notes.
G
Use only in accordance with the
G
operational data.
Any servicing work and repairs may
G
only be performed by GEMÜ.
DANGER
Strictly observe the safety data sheets
or the safety regulations valid for the
media used.
In case of uncertainty
Consult the nearest GEMÜ sales offi ce.

fundamental safety
2.2

Warning notes

Wherever possible, warning notes are
organised according
scheme:
SIGNAL WORD
Type and source of the danger
® Possible consequences of
non-observance.
Measures for avoiding danger.
G
Warning notes are always marked with a
signal word and sometimes also with a
symbol for the specifi c danger.
The following signal words and danger levels
are used:
Imminent danger!
® Non-observance will lead to death or
severe injury.
A possibly dangerous situation!
® Non-observance can cause death or
severe injury.
CAUTION (WITHOUT SYMBOL)
A possibly dangerous situation!
® Non-observance can cause damage to
property.
23 / 44
to the following
DANGER
WARNING
550_us