Connecting The Monitor Electrically - Dometic M9LQ Bedienungsanleitung

M9LQ
7.3

Connecting the monitor electrically

The circuit diagram for the LCD monitor can be found in fig. d, page 8:
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
EN
Description
Monitor
Monitor cable plug
Socket for connection cable
Connection cable
CAMERA BACK socket: Connection to BACK video source,
e.g. reversing camera
CAMERA RIGHT socket: Connection to RIGHT video source, e.g. side
camera
CAMERA LEFT socket: Connection to LEFT video source
with video signal detection, e.g. side camera
CAMERA FRONT socket: Connection to FRONT video source
with video signal detection, e.g. front camera
Wire (red) Connection to 10 – 32 V, e.g. to the positive pole of the
ignition (connected positive, terminal 15) or the positive pole of the
battery (terminal 30)
Wire (brown): CAMERA B TRIGGER control signal for CAMERA BACK
video input,
such as for connecting the reversing light
Earth cable (black): Connection to earth
Wire (blue): CAMERA R TRIGGER control signal for CAMERA RIGHT
video input, e.g. side camera
Wire (white): CAMERA L TRIGGER control signal for CAMERA LEFT video
input, e.g. side camera
Wire (green): CAMERA F TRIGGER control signal for CAMERA FRONT
video input, e.g. front camera
Wire (yellow): SPLIT control signal for activating the split-screen (screen is
divided into two parts with any two cameras, e.g. side cameras on one
transport belt)
Socket (yellow): LIVE VIDEO OUTPUT, video output
Socket (white): AUDIO OUT, audio output
Socket (green): REC V OUT, video recorder output
Socket (black): AUX AUDIO INPUT, audio input 3.5 mm clip socket
Installing the LCD monitor
47