Diseqc 1.2 / Usals Settings - Megasat HD 3 Kompakt Bedienungsanleitung

4. Main Menu
USALS Settings
Press OK when you have found the type
of engines on USALS to enter settings in
the USALS.
• Satellite
• Longitude
• Latitude
• Go to center
• Go to position
DiSEqC 1.2 Settings
Press OK when you have found the type
of engines on DiSEqC 1.2 to reach Set-
tings in the DiSEqC 1.2.
• Single steps
• Permanent
• Go to center
• East/West Limit
• Save
12
Use the t u keys to select the desired satellite.
Press OK to change the longitude. Use the navigation
buttons to change the value.
Press OK to change the latitude. Use the navigation buttons
to change the value.
Rotates the antenna to the center position.
Rotates the antenna to the desired position.
Press the t u buttons to rotate the motor step by step.
Press the t u buttons to rotate the motor continuously.
Press OK to move the antenna to the center position.
Set the East, or West limit.
Save the settings.
ENGLISH