Installing And Connecting The Devices; Installation Of The Radio Camera - Conrad Electronic 750602 Bedienungsanleitung

Installing and Connecting the Devices

Select a suitable installation site from which you want to monitor the desired object.
A suitable installation site has the following features:
• dry
• as dust-free as possible
• little vibrations
• good air circulation
• with a wall outlet in close vicinity
Select an installation site that is not screened off by reinforced concrete
walls, mirrors, metal shelves, etc. Close to the sender respectively receiver,
there should not be any appliances with strong electric fields, e.g. cell pho-
nes, walkie-talkies, electric engines, etc.
The above points could severely impair radio transmission respectively reduce the
range.
Installing the Radio Camera
Attention!
Prior to drilling and inserting the screws, make sure that there are no
electric cables, pipes, etc. in the wall that may become damaged.
Attaching the wall mount:
Do not point the camera into direct sunlight or strong light sources, as this
oversteers the image.
• Select a suitable installation site (if
possible, with power outlet).
• Screw the wall mount to a suitable
wall or platform with the enclosed scr-
ews, if applicable use dowels.
• Insert the tripod thread of the wall
mount (12) into the thread hole of the
camera (4) and screw both together.
• Align the camera and screw the rib-
bed plastic case tight.
27