Connecting The Radio Camera; Installation Of The Base For The Monitor - Conrad Electronic 75 15 23 Bedienungsanleitung

Select a suitable mounting location for the camera
• There is an oblong hole on the camera's installation sup-
port. Hold the camera on the intended installation site and
draw the attachment holes.
• Drill the attachment holes.
• Attach the support and the camera on the installation site.
Do not point the camera directly toward a
source of bright sunlight or toward strong or indirect illumination as this may lead to
overexposure and a fuzzy picture.
7.2 Connection of the radio camera
• Connect the low-voltage plug of the supplied power pack
unit with the connection for the power supply (6) on your
radio camera.
• Insert the power pack unit into a suitable mains socket.
The power pack unit may never be plugged
in or out with wet hands. There is risk of a fatal electric shock.

7.3 Installation of the base for the monitor

• First assemble the base (if not already supplied on delivery)
• Then insert the silver guide nut into the track located on the rear of the monitor.
• Tighten the lacking screw on the base to ensure proper support.
27