Engine Oil Replacement - Yamaha TT-R125 Fahrer- Und Wartungs-Handbuch

ENGINE OIL REPLACEMENT

5. Install:
G
6. Start the engine and let it warm up for
several minutes.
7. Turn off the engine and inspect the oil
level once again.
NOTE:
Wait a few minutes until the oil settles before
inspecting the oil level.
ENGINE OIL REPLACEMENT
1. Start the engine and warm it up for sev-
eral minutes and wait for five minute.
2. Place the machine on a level place and
hold it on upright position by placing the
suitable stand under the engine.
3. Place a suitable container under the
engine.
4. Remove:
G
G
5. Install:
G
G
6. Fill:
G
7. Check:
G
8. Check:
G
9. Install:
G
3 - 9
Dipstick
Oil drain bolt 1
Dipstick 2
Drain the engine oil.
Copper washer
New
Oil drain bolt 1
20 Nm (2.0 m · kg, 14 ft · lb)
Engine oil
Oil capacity:
Periodic oil change:
1.0 L (0.88 Imp qt, 1.06 US qt)
Oil leakage
Engine oil level
Dipstick 2
INSP
ADJ