Replacing The Lamp; Troubleshooting - JUNO JB131D8 Benutzerinformation

30
A B
Make sure that you install the middle
panel of glass in the seats correctly.

Replacing the lamp

Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.

TROUBLESHOOTING

WARNING! Refer to Safety
chapters.
What to do if...
Problem
You cannot activate or oper‐
ate the oven.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
A
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.
B
4. Install the glass cover.
Possible cause
The oven is not connected
to an electrical supply or it is
connected incorrectly.
The oven is deactivated.
The clock is not set.
The necessary settings are
not set.
WARNING! Danger of
electrocution! Disconnect the
fuse before you replace the
lamp.
The lamp and the lamp glass
cover can be hot.
CAUTION! Always hold the
halogen lamp with a cloth to
prevent grease residue from
burning on the lamp.
Remedy
Check if the oven is correct‐
ly connected to the electrical
supply (refer to the connec‐
tion diagram if available).
Activate the oven.
Set the clock.
Make sure that the settings
are correct.