03/2012
1008110-02
–
Use the cushion as scratch prevention when opening the canopy panel.
5.7.2
Removing the acrylic glass panel
–
Remove the screws and remove the washers.
–
Push the bed to the rear with one hand and pull it out of the front guide
with the suction cup.
–
Remove the acrylic glass panel and carefully lay it aside.
The assembly is the same process in reverse order.
When assembling the device please note:
–
Carefully lay the acrylic glass panel in the guide.
–
Remove fingerprints and other soiling carefully.
Cleaning and maintenance
Operating instructions – 45/80