Operating Lock - HomeMatic HmIP-BWTH Installations- Und Bedienungsanleitung

Operating modes and configuration
• Select the start time and date by turning the con-
trol wheel and confirm by pressing the control
wheel briefly. "S" indicates a start time.
• Select the end time and date by turning the con-
trol wheel and confirm by pressing the control
wheel briefly. "E" indicates an end time.
• Set the temperature that you want to maintain
during the defined time using the control wheel
and confirm by pressing the control wheel briefly.
• By turning the control wheel you can select the
rooms for activating the holiday mode.
-
-
6.4

Operating lock

Operation of the device can be locked to avoid settings
being changed unintended (e.g. through involuntary
touch). To activate the operating lock, please proceed as
follows:
Press and hold down the control wheel (E) to
•
open the configuration menu (see fig. 6).
• Select the
66
Selection "OnE":
The holiday mode is activated for the current
wall thermostat.
Selection "ALL" (only relevant in connection
with a floor heating actuator):
The holiday mode is activated for all wall
thermostats that are connected to the floor
heating actuator.
symbol by turning the control wheel