tO chANNEl: part of the source channel signal (FROM CHANNEL) is mixed into the target channel
(TO CHANNEL). The mixer ratio is determined by the percentage values entered in the "TRAVEL-" and
"TRAVEL+" lines. Select "0" if you do not require the mixer.
Mixer ratio (tRAVEl-/+): in these two lines you can define the mixer ratio in relation to the source
channel (FROM CHANNEL); the value is set separately for both directions.
programming examples:
V-tail with rudder differential
RX FREE MIXER
>MIXER:
MASTER CH:
SLAVE CH:
>TRIM:
>TRAVEL-:
TRAVEL+:
Differential is not normally necessary with this tail type. Mixer 3 is not required if you do not need rudder
differential, and TRAVEL- for mixer 2 must then be set to -100%.
Alternatively you may prefer to carry out the programming using the transmitter menu. A 'Rudder
elevator' mixer can be set up at the transmitter instead of 'Free mixer 3' at the receiver; the mixer should
be set up asymmetrically, e.g. +30%, -30%. This option frees up one mixer at the receiver.
Delta with aileron differential (1 aileron)
RX FREE MIXER
>MISCHER:
MASTER CH:
SLAVE CH:
>TRIM:
>TRAVEL-:
TRAVEL+:
In this example aileron differential is set to 40%. Alternatively you may prefer to carry out the programming
using the transmitter menu. An 'Aileron elevator' mixer can be set up at the transmitter instead of
'Free mixer 3' at the receiver; the mixer should be set up asymmetrically, e.g. +30%, -30%. This option
frees up one mixer at the receiver.
two elevator servos
(channel 6 for the second elevator servo)
RX FREE MIXER
>MISCHER:
MASTER CH:
SLAVE CH:
>TRIM:
>TRAVEL-:
TRAVEL+:
26
< >
RX FREE MIXER
1
>MISCHER:
MASTER CH:
3
4
SLAVE CH:
>TRIM:
+0%
+100%
>TRAVEL-:
+100%
TRAVEL+:
< >
RX FREE MIXER
>MISCHER:
1
2
MASTER CH:
SLAVE CH:
3
+0%
>TRIM:
>TRAVEL-:
+100%
+60%
TRAVEL+:
< >
1
3
8
+0%
+100%
+100%
< >
RX FREE MIXER
2
>MIXER:
MASTER CH:
4
3
SLAVE CH:
>TRIM:
+0%
-60%
>TRAVEL-:
+100%
TRAVEL+:
< >
RX FREE MIXER
>MISCHER:
2
3
MASTER CH:
SLAVE CH:
2
+0%
>TRIM:
>TRAVEL-:
-100%
-100%
TRAVEL+:
Manual Receiver GR-18/24PRO
< >
3
4
4
+0%
+100%
+60%
< >
3
2
2
+0%
+60%
+100%