The „Instrument Panel" (Screen); Operating Display - Multiplex PROFI car 403 Bedienungsanleitung

The „instrument panel" (screen)
The picture below shows everything which the screen can display. What you actually
see at any one time depends on what you are doing: whether timers are active,
whether you are currently programming the transmitter, which type of vehicle you
have selected, etc.
A few examples are shown on this page.
Menu
symbols
IT = Initial Throttle
Brake 1
Brake 2

Operating display

Timer mode: OFF
If no timer function is active, the first text line displays the
model name you have entered. Text line 2 shows the
transmitter battery voltage.
Timer Mode: LAP
The second text line shows the number of the lap on the left-
hand side. To record the start and end of each lap you press the
G
handle button
Timer-Mode: L+T (Laps + Time memory)
In this mode the second text line shows the number of the lap
on the left (in our example 03) and the time for the current lap
on the right (in our example 28.3 sec).
Timer-Mode: L+T+E (Laps + Time memory + Race duration)
The first text line displays the total duration of the race (in our
example 2 min. 36.5 sec). The second text line shows the
number of laps and the time of the current lap, as in the
previous example.
.
8
Number of
Active
model memory
Text line 1
Text line 2
STV =
Steering travel
STR =
Steering TRim
BUGGY
7. 4 V
BATT
BUGGY
03 7. 4 V
LAP BATT
BUGGY
03 28: 3
LAP
2: 3 6: 5
03 28: 3
LAP