Part 3: Functions And Operation - involight VENTUS S Bedienungsanleitung

Part 3: Functions and operation:

The device is connected to the power supply via the mains cable. You can adjust and influence the different
operating modes via the on-board menu.
Picture 1 (backside):
1. ON/OFF – Turn the unit on or off.
2. AUTO/SOUND – Chose between automatic mode and music-controlled operation.
3. PROGRAMS – Selection of internal programs (1 -3). Program 1: Derby effect. Program 2: Derby effect + fading
Blinder. Program 3: Derby effect + strobe.
4. SPEED – Sets the speed at which the selected program should run (1 - 9).
5. MIC – Microphone for music control.
6. POWER –
IEC mains power input socket with fuse holder for F1A 250V fuse.
7. Safety eye –
The device must be secured with a suitable safety cable against dropping.
1. 2. 3.
. . .
13
5.
.
4.
.
7.
.
6.
.