Part 3: Functions And Operations; Lcd-Display With 4 Button; Menu Structure - involight LED MH50 DUAL Bedienungsanleitung

Part 3: Functions and operations.

3.1 LCD-Display with 4 button.

Connect the LEDMH50Dual to the mains. The device performs the usual reset procedure. Wait until it's done. The
LCD display with 4-button operation is the heart of the LEDMH50Dual.This can be used to set all functions and
modes. Below, the individual functions and modes are listed in tabular form.
Press the OK button so that the display turns on. By pressing the appropriate arrow key (down, up, left and right) you
can move in the main menu. You can change the selection by pressing the appropriate arrow key. The respective
functions are described below.

3.2 Menu structure.

Mode
Address Address Setting
Channel Mode
Fixture
Pan/Tilt Setting
Menu
Standard Mode
Extend Mode
Invert Pan
Invert Tilt
Description
DMX Adressing
button (Enter),until "DMX Address"
a) Press the
appears.
b) Press the ▲ (Up) or ▼ (Down) buttons to select the
desired address.
c) As soon as the correct address is shown on the display,
confirm with the (Enter) or button.
d) Press the (Return) key to exit the selection without
saving.
You can select your desired DMX channel mode.
a a) Press the button (Enter) until "Channel Mode" is
displayed.
b) To select the desired DMX mode, press the ▲ (Up) or ▼
(Down) buttons.
c) To confirm and exit the menu press the key
button.
d) Press the (Return) key to exit the selection without
saving.
Schwenkung- Neigungsinversion.
a) Press the (Enter) button ,until "Pan Invert" oder
„Tilt Invert" appears.
▲
b) Press the (Up) or
appears.
c) To confirm and exit the menu press the key
d) Press the (Return) to exit the selection without
saving
26
▼
(Down) until "Yes" or „No"
(Enter)
(Enter).