Connecting The Audio Cable - AEG dvd 4536 Bedienungsanleitung

English
44
Fig. 2/19
Fig. 2/17

Connecting the Audio cable

Fig. 2/21
05-DVD 4536 N AEG_GB.indd 44 05-DVD 4536 N AEG_GB.indd 44
2. Plug the jacks into the corresponding socket on your playback
device.
Press the VIDEO button (Fig. 3/22) repeatedly to select between the
settings „Progressive" (P-Scan), „RGB", „S-Video" and „Interlace" for
the connected playback device. Please see the operating instructions
of the connected device for the correct setting.
S-Video
Connection using a S-Video cable ensures a very high replay quality.
Component Video transmits only Video signals.
1. Plug the S-Video jack into the socket on the back of the player.
2. Plug the S-Video jack into the corresponding socket on your play-
back device.
Composite-Video
Composite-Video is used to transmit only Video data.
1. Plug the Composite-Video jack into the socket on the back of the
player.
2. Plug the Composite-Video jack into the corresponding socket on
your playback device.
You can choose from three transmission methods for audio signals.
You must generally choose fi rst whether you would like to have the
sound coming from your TV, or through a Stereo or 5.1-Amplifi er. The
Audio cable must then be connected to the TV or an amplifi er accord-
ingly.
NOTE:
If your amplifi er is equipped with a digital output, you should use the
amplifi er. You will experience a much better audio quality, and the
installation is much easier.
Stereo
Connect both Audio cables for the right and the left speakers to your
playback device or your amplifi er.
1. Plug the Audio jacks into the sockets on the back of the player.
2. Plug the Audio jacks into the corresponding sockets on your play-
back device or your amplifi er.
30.07.2009 16:50:16 Uhr 30.07.2009 16:50:16 Uhr