Before First Use - ZANKER KDT 10032FK Benutzerinformation

Deactivating the rinse aid dispenser
While the appliance is in user mode:
1. Press .
• The indicators
• The indicator
• The indicator
2. Press to change the setting. The indicator
The rinse aid indicator goes off.
3. Press the on/off button to confirm the setting.
Activating the acoustic signal for the end of programme
By default this acoustic signal is deactivated but it is possible to activate it.
While the appliance is in user mode:
1. Press .
• The indicators
• The indicator
• The indicator
2. Press
to change the setting. The indicator
3. Press the on/off button to confirm the setting.

Before first use

1. Make sure that the current level of the water
softener agrees with the hardness of the water
8
, and go off.
continues to flash.
indicates the current setting: the indicator
, and go off.
continues to flash.
indicates the current setting: the indicator
on = Rinse aid dispenser activated.
off = Rinse aid dispenser deactivated.
off = Acoustic signal off.
on = Acoustic signal on.