Options; Before First Use - ZANKER KDT10042FK Benutzerinformation

Options

Desired options must be activated every
time before you start a programme.
It is not possible to activate or deactivate
options while a programme is running.
XtraDry
Activate this option when you want to boost the drying
performance. With use of this option, the duration of
some programmes, water consumption and the last
rinse temperature can be affected.
Option XtraDry
1. Set the programme.
2. Press and hold simultaneously
If the option is not applicable to the programme, the related indicator does not come on or it flashes quickly for a few
seconds and then goes off.

Before first use

1. Make sure that the current level of the water
softener agrees with the hardness of the water
supply. If not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance. Do
not use detergent and do not load the baskets.
10
The XtraDry option is a permanent option for all
programmes other than
selected at every cycle.
Every time
and needs to be chosen manually. In other
programmes, the setting of XtraDry is permanent and it
is automatically used in next cycles. This configuration
can be changed at any time.
and until the indicator
When you start a programme, the appliance can take up
to 5 minutes to recharge the resin in the water softener.
It seems that the appliance is not working. The washing
phase starts only after this procedure is completed. The
procedure will be repeated periodically.
and need not to be
is activated, XtraDry option is off
comes on.