Personal Safety - Parkside PGG 15 A1 Originalbetriebsanleitung

General safety advice for electrical power tools
Do not use the mains lead for any purpose for
d)
which it was not intended, e.g. to carry the de-
vice, to hang up the device or to pull the mains
plug out of the mains socket. Keep the mains lead away
from heat, oil, sharp edges or moving parts of the
device. Damaged or tangled mains leads increase the risk of
electric shock.
e) When working outdoors with an electrical power tool
always use extension cables that are also approved
for use outdoors. The use of an extension cable suitable for
outdoor use reduces the risk of electric shock.
f) Use a residual current device (RCD) for protection if
operating the electrical power tool in a moist environ-
ment is unavoidable. The use of an RCD reduces the risk of
electric shock.

3. Personal safety

a) Remain alert at all times, watch what you are doing
and always proceed with caution. Do not use the de-
vice if you are tired or under the influence of drugs,
alcohol or medication. One moment of carelessness when using
the device can lead to serious injury.
b) Wear personal protective equipment and
always wear safety glasses. The wearing of per-
sonal protective equipment such as dust masks, non-slip
safety shoes, safety helmets or ear protectors, appropriate to the
type of electrical power tool used and work undertaken, reduces
the risk of injury.
c) Avoid unintentional operation of the device. Check
that the electrical power tool is switched off before you
GB 11