Remote Control With The Foot Pedal Fp-1; Operation Via Dmx Controller - EuroLite LED KLS-2001 Bedienungsanleitung

7.2 Remote control with the foot pedal FP-1

The foot pedal available as accessory allows convenient control of the light set.
1
Press pedal 1 PRESETS repeatedly for the desired function. One in seven preset colors or color
change and color fade of the colors can be selected.
Number
1
2
3
4
5
6
7
8
9
10
11
12
2
Press pedal 2 SOUND CONTROL to select sound control.
3
Press pedal 3 FREEZE to select the freeze function. Then the current color is kept.
4
Press pedal 4 BLACK OUT to switch off all LEDs.
5
After switching the light set off and on again, the function selected last is activated.

7.3 Operation via DMX controller

For operation with a controller with DMX512 protocol, the light set is equipped with 23 control channels.
Setting the DMX starting address and selecting the DMX operating mode
To be able to operate the light set with a DMX controller, the DMX starting address must be set for the first
DMX channel. For this press the button MENU so many times until
use the buttons UP and DOWN to set the address.
As soon as the light sets receives DMX control signals, the red DMX indicator lights up in the display
and the set can be operated with the DMX controller.
Note: The starting address depends upon which DMX controller is being used. Please refer to the
controller's documentation.
Function
white
red
green
blue
amber
white
yellow
purple
cyan
amber & white
color change every second
color fade every 3 seconds
28/34
is indicated in the display. Then
00064317.DOC, Version 1.0