Remote Control With The Foot Pedal Fp-1; Operation Via Dmx Controller; Setting The Dmx Starting Address And Selecting The Dmx Operating Mode - EuroLite LED KLS-800 Bedienungsanleitung

6.2 Remote control with the foot pedal FP-1

The foot pedal available as accessory allows convenient control of the light set.
1. Press pedal 1 PRESETS repeatedly for the desired function. One in seven preset colors or color change
and color fade of the colors can be selected.
Number
1
2
3
4
5
6
7
8
9
2. Press pedal 2 SOUND CONTROL to select sound control.
3. Press pedal 3 FREEZE to select the freeze function. Then the current color is kept.
4. Press pedal 4 BLACK OUT to switch off all LEDs.
5. After switching the light set of and on again, the function selected last is activated.

6.3 Operation via DMX controller

For operation with a controller with DMX512 protocol, the light set is equipped with 15 control channels.

6.3.1 Setting the DMX starting address and selecting the DMX operating mode

1. To be able to operate the light set with a DMX controller, the DMX starting address must be set for the
first DMX channel. For this press the button MENU so many times until
Then use the buttons UP and DOWN to set the address.
Note: The starting address depends upon which DMX controller is being used. Please refer to its user manual.
2. To switch to the DMX operating mode, press the button MENU so many times until the display indicates
. or . Then press the button UP. The display will indicate
the light set can be operated with the DMX controller.
Function
white
red
green
blue
cyan
yellow
purple
color change every second
color fade every 3 seconds
27/31
is indicated in the display.
and after a few seconds
00054243.DOC, Version 1.2