Scope Of Delivery; Technical Details; Intended Use; Safety Notice - Crivit SL-1835 Gebrauchsanleitung

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it. Carefully read the
following instructions for use. Use the product
only as described and only for the given areas
of application. Keep these instructions safe.
When passing the product on to a third party,
always make sure that the documentation is
included.
Scope of delivery (fig. a)
(1) main frame 1x
(2) footrest frame 1x
(3) sunroof 1x
(4) wheels 2x
(5) rod 2x
(6) screw long 2x
(7) screw short 2x
(8) washer 2x
(9) cap nut 2x
(10) pin 2x
(11) spanner 1x
Instructions for use 1x

technical details

Weight: approx. 4.3kg
Dimensions: approx. 148 x 66 x 91cm
(L x W x H)
Max. load: 100kg
Max. loading capacity when used as a transport
aid: 20kg

intended Use

The article is not designed for commercial use.
The article is intended for use in the leisure and
camping sector (outdoor area).

Safety Notice

WaRNiNG!
• Danger of suffocation for children!
• Never allow children to play with packaging
materials when unsupervised.
6 GB/CY
danger of injury!
• Do not place loads that exceed 100kg on the
beach and transport stretcher.
• Check the article before initial use for dam-
age or signs of wear and tear. Make sure that
all connecting elements are sufficiently tighten-
ed. The article may only be used when in
perfect condition!
• Tighten each individual screw before using
the beach chair.
• Place the beach chair only on solid, even
ground.
• Risk of injury if product is incorrectly assem-
bled!
danger of Bruised Fingers!
• The beach chair may only be erected by
adults. Take care not to trap your fingers
when folding and unfolding the article.
Caution!
• Always supervise your children. The beach
chair is not a toy or a climbing aid.
Make sure that nobody stands on the head or
foot sections of the chair.
• The beach chair can also be used as a
transport aid, although it is not designed for
transporting people!

assembly

Step 1: assembling the Foot Frame
Section
The lounger needs to be folded in order to make
the assembly of the footrest frame easier.
Remove the screw (6) from the connection rod
on the main frame (fig. B).
The holes on the inside rods must be in the same
position as those on the footrest frame.
The footrest frame is then attached to the main
frame (fig. C). The connecting rod on the main
frame is now attached to the footrest frame using
the screw (6) (fig. D).