Safety Information For Drilling Machines - Parkside PSBM 500 B3 Originalbetriebsanleitung

before making any adjust-
ments, changing accessories, or
storing power tools. Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
Store idle power tools out of the
•
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
Maintain power tools. Check
•
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool's
operation. If damaged, have
the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and
•
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
Use the power tool, accessories
•
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
• Carefully inspect the area to be cut
and remove all wires or other foreign
bodies.
Service
Have your power tool serviced
•
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Safety information for
drilling machines
• Wear ear protection during im-
pact drilling. The exposure to noise
can cause hearing loss.
• Use the additional handles de-
livered with the device. The loss of
control can result in injuries.
• Hold the device by the insulated
gripping surfaces when perform-
ing work in which the cutting
tool may come into contact with
hidden wiring or its own cord.
Contact with a live wire can also cause
a charge in metal parts of the device
and result in an electric shock.
• Use suitable detectors in order to
find hidden supply lines or ask
the local utility company. Contact
with electrical cables can lead to
electric shock and fire, contact
with a gas pipe can result in an
explosion. Damage to a water pipe
can lead to property damaged and
electric shock.
• Keep hands away from rotating
parts. Wait until the power tool
has stopped before placing it
down. Risk of injury!
• Avoid contact with the tool insert
or the component part immedi-
ately after processing. The parts
may be hot and cause burn injuries.
• Immediately switch off the
power tool if the tool insert is
blocked due to overloading or
tilting of the component part. The
loss of control can result in injuries.
• Secure moving component part
with clamping devices. A hand
held tool can slip and endanger your
safety.
GB
9