Safety Information For Drilling Machines; Residual Risks; Mounting - Parkside PSBM 750 A1 Originalbetriebsanleitung

parts. This will ensure that the safety
of the power tool is maintained.
Safety information for
drilling machines
• Wear ear protection during im-
pact drilling. The exposure to noise
can cause hearing loss.
• Use the additional handles de-
livered with the device. The loss
of control can result in injuries.
• Hold the device by the insulated
gripping surfaces when per-
forming work in which the cut-
ting tool may come into contact
with hidden wiring or its own
cord. Contact with a live wire can also
cause a charge in metal parts of the
device and result in an electric shock.
• Use suitable detectors in order
to find hidden supply lines or
ask the local utility company.
Contact with electrical cables
can lead to electric shock and
fire, contact with a gas pipe can
result in an explosion. Damage
to a water pipe can lead to property
damaged and electric shock.
• Keep hands away from rotating
parts. Wait until the power tool
has stopped before placing it
down. Risk of injury!
• Avoid contact with the tool insert
or the component part immedi-
ately after processing. The parts
may be hot and cause burn injuries.
• Immediately switch off the
power tool if the tool insert is
blocked due to overloading or
tilting of the component part.
The loss of control can result in injuries.
• Secure moving component part
with clamping devices. A hand
GB
held tool can slip and endanger your
safety.
• The device must only be connected to
a mains socket via a residual-current
circuit breaker (RCD) with a rated leak-
age current of not more than 30 mA.

Residual risks

Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Injuries caused by moving parts;
b) Ear damage if working without ear
protection;
c) Lung damage, if suitable respiratory
protection is not worn;
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.

Mounting

Pull out the power plug before car-
rying out any work on the equip-
ment. There is a risk of electrocution
or of injury from moving parts.
IE NI CY
9