Status Leds; Meaning Of The Leds On The Front Panel - G&D DP-Vision-CAT Installation Und Bedienung

Status LEDs

Status LEDs
The LEDs on both the front and the back panel of the computer module and the
user module let you control the operational status of the KVM extender at any time.

Meaning of the LEDs on the front panel

Area LED
Ident. Ident.
Power Red.
Main
Status K/M
System
Channel Video
Trans.
Network left
right
50 · G&D DP-Vision-CAT
Color Status
blue on
green on
off
green on
off
green on
blinking
green on
blinking
fast
blinking
red on
yellow on
off
yellow on
off
yellow on
off
green flickering
off
Meaning
On as soon as the LED has been activated via
web application.
The optional power pack is connected and
supplies voltage of 12 Volt.
The optional power pack is not (properly)
connected.
The power pack is switched on and supplies the
required voltage.
The power pack is switched off or a connection
to the power network could not be established.
The keyboard has been detected.
No keyboard connected or keyboard could not
be detected.
Device is ready for operation.
Executing update.
Device is reset to default settings after pushing
the Reset button for a long time.
Internal error
A stable video signal has been detected at the
video input.
The incoming video signal could not be
detected or its quality is not good enough to be
processed.
The connection to the remote station has been
established.
The connection to the remote station could not
be established.
The connection to the network has been
successfully established.
A connection could not be established.
Network activity.
No network activity