Configuration
Information display
Information displays are shown temporarily (5 seconds) in the upper left corner.
ADVICE:
If the temporary information display is active, you can press the hotkey
Ctrl+Caps Lock
to repeat the caption.
The information display can also be shown permanently or it can be disabled
How to change the setting of the information display:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under
Display
Off
Temporary
Permanent
5. Press
to save your settings.
F2
1. Click on
KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
4. Under
Display
Off
Temp
Perm
5. Click
OK
to save your changes.
44 · G&D DP-Vision-CAT
(default) to open the on-screen display.
Console setup
and press
Personal Profile
press
to select between the following options:
F8
information display is turned off
information display is shown temporarily for 5 seconds (default)
permanent information display
Remote > Extender system > Personal profile
select one of the following options:
information display is turned off
information display is shown temporarily for 5 seconds (default)
permanent information display
Enter
.
and press
Enter
.
on the directory tree.
.