Selecting The Input Mode - Yamaha YRS-1000 Bedienungsanleitung

Selecting the input mode

You can select the type of audio input signals of the selected input source according to your preference or the conditions
of the input source. This function is available for TV/STB, DVD, and AUX.
y
We recommend setting the input mode to AUTO in most cases.
STB VCR
INPUT1
TV
AUTO
SETUP
VOL MODE
5BEAM
1
STEREO
4
7
0
CH LEVEL
TEST
1
Set the operation mode selector to YSP.
TV/AV
YSP
2
Press one of the input selector buttons to
select the desired input source.
STB
TV
68
En
Selecting the input mode
AV TV
DVD AUX
TV
INPUT2 MACRO
INPUTMODE SLEEP
ST+3BEAM 3BEAM
2 3
MY SUR.
5 6
8 9
SUR. DECODE
+10
MENU
TV/AV
ENTER
YSP
RETURN
VCR DVD AUX
3
Press INPUTMODE repeatedly to toggle
between input modes.
INPUTMODE
DVD AUTO
DVD DTS
When DVD is selected
as the input source
AUX AUTO
AUX DTS
When AUX is selected as
the input source
Note
ANALOG is not available as the input mode of DVD and
AUX.
• AUTO
Automatically selects audio input signals in the following
priority order:
1) Dolby Digital or DTS
2) PCM
3) Analog
y
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability while playing back CDs or LDs encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input
simultaneously, only analog signals are selected.
y
You can adjust the default input mode to be selected when the
power of this unit is turned on by adjusting INPUT MODE in
INPUT MENU (see page 60).
TV/STB AUTO
TV/STB DTS
TV/STB ANALOG
When TV or STB is selected
as the input source