Megasat 3410 Bedienungsanleitung Seite 64

How to connect:
A. Plug a SCART cable to the SCART TV connector of the DVB-S receiver and the other end
to the TV set.
B. Plug the antenna cable to the input, called LNB In. Screw the connector tightly.
C. Please pay attention that all plugs are connected correctly.
D. Connect the power cable and the plug to the wall outlet.
E. Switch on the receiver when the power indication light shows a red light.
F. Choose on your TV set the SCART input
Note:
By using the loop through connector you can connect for example a second DVB-S Receiver.
14
Connection