4. OPERATION
4.1 Connecting AC Adapter
(1)Turn off the Power switch.
(2) Connect the cable connector of the AC adapter to the power connector located on the back of
the printer.
(3) In order to prevent disconnection of the cable connector, put it through a wire saddle, as
shown in the figure below.
(4) Connect the AC power cord plug to a plug socket.
CAUTION
: • Use only the specified AC adapter.
• Use a different AC power supply from one used for any noise-generating
device.
• Do not use the accessory AC adapter for another device or application
besides this equipment.
• When disconnecting the AC adapter, be sure to hold the AC adapter itself
or the plug. Do not pull its cord.
• Pulling an AC adapter cord will damage it and may result in fire, electric
shock, or snapping of the wire.
• If lightning is occurring in the area, disconnect the AC adapter from the
plug socket and do not use the equipment. A lightning strike could result
in fire or electric shock.
• Do not put the AC adapter cord near any thermal device. The coating of
the power cord can melt, resulting in fire or electric shock.
• When the printer is not used for a long period of time, be sure to
disconnect the AC adapter from the plug socket, for safety.
20
iDP-460 User's Manual
CITIZEN