Nussbaum BM 10 Bedienungsanleitung Seite 48

F6:
Auto run
The auto run function enables a measuring run to be
started by closing the wheel guard.
Application: Press key 12 to select the function menu. Use keys
4 or 5 to select the Function 6. Press 12 again to
activate the function. The present setting is shown
on the display. The setting can be changed using the
keys 4 or 5.
Display:
Aut on
Aut oFF
The setting is confirmed by pressing the key 12.
F7:
Suppression / Rounding off
The suppression and rounding off of the balance
results can be selected with this function. By sup-
pressing the minor unbalance readings any results
less than 5 grams will be shown as 0. Rounding off
will display the balance results in multiples of 5
grams e.g. 32 grams are shown on the display as 30
grams 33 grams are shown as 35 grams.
Application: Press key 12 to select the function menu. Use keys
4 or 5 to select the Function 7. Press 12 again to
activate the function. Using keys 4 or 5 The suppres-
sion can be selected in either 1 gram or 0.1 ounce
depending on the previous function settings.
in 50
Display:
By pressing key 12 again, the setting is acknow-
ledged and the program returns to the function
„rnd".
rnd 50
Display:
Here again by using keys 4 and 5 the settings to
round off for 1 Gram / 0,1 ounces can be applied.
Press key 12 again to activate the function and the
program will automatically return to normal mode.
48
F
= Auto run activated
= Auto run deactivated
F
= e.g. suppression up to 5 Grams
= e.g. Rounding off 5 Gram
6 F8:
Wheel guard safety switch
A wheel guard has to be fitted to all balance machi-
nes with a rotation speed greater than 100 rpm by
law. The safety device is fitted to make sure that the
machine only starts when the wheel guard is closed.
If the safety device is switched off by the user, the
manufacturer will take no responsibility for any resul-
ting damage or injury occurring thereof.
Application: Press key 12 to select the function menu. Use keys
4 or 5 to select the Function 8. Press 12 again to
activate the function.
5Ec
Display:
!
For safety reason, this function should not be deac-
7
tivated!
5Ec
The settings can be changed by the use of keys 4
and 5.
! Please check your national regulations and laws
before deactivating the safety function.
on
= the balance run can be started
only when the wheel guard is
closed.
oFF
= the balance run is able to start
with the wheel guard open.
13.01.2010 1 689 979 917N
F 8